Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Door Panel of the Mazda CX-30

Model: Mazda Cx 30 , MK 1 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Door trim panel

Video tutorial

Briefly, here are the instructions to remove and detach the front door panel of the Mazda CX-30. First, open the front door of the vehicle and begin unscrewing all the fixing screws located on the panel, removing the cover of the grab handle; remove the window switch panel, disconnecting the wiring underneath, as shown in the video.

At this point, pry at the edges of the panel until it detaches and remove it, disconnecting the handle cable; carry out the necessary repairs or replacements, and finally reassemble the door trim.


Posted on 5 June 2026 by ScegliAuto


Related tutorials

Removing the External Door Handle on a Mazda CX-30
Removing the External Door Handle on a Mazda CX-30
Mazda Cx 30 (2019-2026 / , MK 1) Briefly, here are the instructions to remove and replace the external door handle on a Mazda CX-30. First, open the vehicle's door and begin removing…
How to replace the external handle on the Mazda CX-30?
How to replace the external handle on the Mazda CX-30?
Mazda Cx 30 (2019-2026 / , MK 1) To replace the external handle on the Mazda CX-30, open the door to locate the screw positioned on the side: this screw must be loosened to extract t…
How to Remove the External Wing Mirror on a Mazda CX-30?
How to Remove the External Wing Mirror on a Mazda CX-30?
Mazda Cx 30 (2019-2026 / , MK 1) In this tutorial, you will learn how to remove the external wing mirror on a Mazda CX-30. This operation is straightforward but requires the removal …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos