Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Wing Mirror on a Mazda CX-30?

Model: Mazda Cx 30 , MK 1 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Side mirror

Video tutorial

In this tutorial, you will learn how to remove the external wing mirror on a Mazda CX-30. This operation is straightforward but requires the removal of the door panel. First, open the door.

Then, using a plastic spatula, unclip the indicated trim, the window switch console, and the internal cover of the mirror. Next, unscrew all the indicated screws, separate the panel from the door, and proceed to remove the control module for the various devices.

At this point, lower the window completely, unscrew the 3 fixing bolts, and detach the mirror from the base.


Updated on 27 July 2026 by ScegliAuto


Related tutorials

Removing the External Handle of the 2020 Mazda CX30
Removing the External Handle of the 2020 Mazda CX30
Mazda Cx 30 (2019-2026 / , MK 1) To remove the external handle of the Mazda CX30, first remove the internal panel: Unscrew the screw beneath the internal handle, gently remove all th…
Removing the External Door Handle on a Mazda CX-30
Removing the External Door Handle on a Mazda CX-30
Mazda Cx 30 (2019-2026 / , MK 1) Briefly, here are the instructions to remove and replace the external door handle on a Mazda CX-30. First, open the vehicle's door and begin removing…
How to Dismantle the Remote and Access the Battery of the Mazda CX-30
How to Dismantle the Remote and Access the Battery of the Mazda CX-30
Mazda Cx 30 (2019-2026 / , MK 1) Dismantling and replacing the battery of the Mazda CX-30 key remote is very simple and does not require any special tools. First, take the remote in …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos