Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Mazda CX-50

Model: Mazda Mazda Various
Part: Service warning light

Video tutorial

Today, we will see the necessary instructions to reset the service light for routine maintenance on the Mazda CX-50. First, get in the car and start the ignition; then, using the controls on the centre console, navigate to the vehicle settings, as shown in the video.

At this point, enter the service menu and confirm the reset of the engine oil light, thus resetting the mileage counter before the next service; exit the settings and check that the service light on the instrument panel has been reset!


Posted on 28 October 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on the Mazda CX-50?
How to Reset the Oil Light on the Mazda CX-50?
Mazda Mazda Various To correctly complete the manual reset procedure for the oil light on your Mazda CX-50 (2024 model), follow these steps. First, get in the car and si…
Resetting the tire pressure warning light on a Mazda
Resetting the tire pressure warning light on a Mazda
Mazda Mazda Various In today's video, we will see the necessary procedure to reset the tire pressure warning light of a Mazda vehicle. Before starting this procedure, it…
How to reset the oil light on the Mazda CX50
How to reset the oil light on the Mazda CX50
Mazda Mazda Various If you want to manually reset the engine oil light of your Mazda CX50 quickly and safely, just follow all the steps described in the following guide …

How to Remove the Rear Hatch Cover of the Mercedes B-Class

In this video, you will learn how to remove the rear hatch cover of the Mercedes B-Class. You will need a small flathead screwdriver to remove the handle cover. Use long-nosed pliers to gently remove the clips inside. The next step is to carefully insert a plastic spatula into the gap created to start removing the cover; it is advisable to start from the sides and work towards the centre. Disconnect the courtesy light connector, and continue gently removing the plastics by leveraging the gaps created, always starting from the sides. Be cautious of clips and wiring, and handle everything with care.

Watch the video!


by ScegliAuto

More videos