Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Pollen Filter Replacement

Model: Mazda 3 MK 2, BL - Years 2009-2013
Part: Cabin air filter

Pollen filters purify the air in the cabin and are located under the passenger side glove compartment. Obtain pollen filters of the same model identical to the originals. To access them, release the passenger side glove compartment door. Remove the two fastening screws, then take off the filter cover by simply pulling it outwards. Carefully remove the filters by pulling them outwards to avoid dispersing dust inside the cabin. To collect dirt, place a cloth on the floor. Thoroughly clean the inside of the filter housing with a vacuum cleaner fitted with a filter, then carefully reinstall the new filters in the housing and close the cover.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter of the Mazda 3
How to Replace the Cabin Air Filter of the Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) Today's guide will show you the instructions to remove and replace the cabin air filter or pollen filter of the Mazda 3. First, get inside the vehicl…
How to Replace the Cabin Air Filter of the Mazda 3
How to Replace the Cabin Air Filter of the Mazda 3
Mazda 3 (2013-2019 / MK 3, BN, BM) Below are the instructions to remove and replace the cabin air filter of the Mazda 3 in simple and quick steps. First, get inside the vehicle on the …
Cabin Air Filter Replacement
Cabin Air Filter Replacement
Mazda 3 (2009-2013 / MK 2, BL) It is very important to change the cabin air filter as it protects us from external agents and allows the car's ventilation duct to breathe better. I…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos