Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mazda
  4. :
  5. Cx 3
  6. : How to reset the oil change light in a Mazda CX-3

Mazda Cx 3 - Video tutorial

Model: Mazda Cx 3 MK 1 - Years 2015-2023
Part: -board computer
Operation: How to reset the oil change light in a Mazda CX-3

In this video tutorial we can see how to reset the oil change warning light in a Mazda CX-3, following a few simple steps: the first thing to do when the service wrench appears under the speedometer, is maintenance of the vehicle such as changing the engine oil and filters. After performing the do-it-yourself service, we have to get into the car, pull the handbrake, turn on the ignition without starting the engine; now we must select in the central screen, the item: "Applications", then we must select: "Vehicle status monitor, next step we must select the item: Maintenance, then" Oil change "and" Reset "and finally we must confirm the reset.


Posted on 18 October 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos