Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front brake pads on your Mazda CX-9?

Model: Mazda Cx 9 TB - Years 2007-2015
Part: Brake pads

To be able to replace the front brake pads of the Mazda CX-9 you have to go and lift the car so that you can unscrew the screws that fix the wheel corresponding to the pads to be replaced. Once this wheel has been removed, it will be possible to unscrew the screws that fix the brake caliper by detaching it from its disc: the pads contained inside this caliper can then be removed and replaced with new spare parts. In this way it will be possible to insert the caliper on the relative disc so that all the previously removed components are then assembled.

Posted on 7 March 2023 by ScegliAuto

Video tutorial

Related tutorials

How do i replace the front brake pads on the Mazda CX-9?
How do i replace the front brake pads on the Mazda CX-9?
Mazda Cx 9 (2016-2024 / TC) Replacing the front brake pads on the Mazda CX-9 is done by lifting the car with a jack or bridge, so that the corresponding wheel is not in contact …
How to replace the cabin filter of the Mazda CX9 2011
How to replace the cabin filter of the Mazda CX9 2011
Mazda Cx 9 (2007-2015 / TB) Thanks to the following guide, you will finally be able to correctly complete the replacement of the cabin air filter of your first series Mazda CX9 …
How do i replace the battery of the Mazda CX-9?
How do i replace the battery of the Mazda CX-9?
Mazda Cx 9 (2016-2024 / TC) In order to replace the battery of the Mazda CX-9 you have to go and open the hood, so that you have access to the components inside the engine compa…

Other guides you may be interested in

How to Change the Diesel Filter on a Renault Captur 1.5 dCi

The diesel filter on the Renault Captur is always of the immersion type, but instead of being located at the top of the engine bay, it is positioned lower, inside the front right wheel arch (passenger side), practically under the headlamp. To replace it, it is advisable to lift the vehicle, remove the front right wheel and the corresponding inner lining to access the filter location. Unscrew the fastening nuts of the support clamp to extract it from its housing and disconnect the connector and pipes. At this point, unscrew the fixing screws of the cap, remove the old filter and insert the new one, also replacing the O-ring seals, and then reverse the steps for installation. Before starting the engine, turn the ignition on and off several times to allow the filter to fill.

Watch the video!


by ScegliAuto

More videos