Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the brake pads of the Mazda CX 5

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part: Brake pads

In today's article, we will show you how to replace the brake pads of the Mazda CX 5. For this operation, a 12mm socket wrench will be needed. First, you need to lift the car on a jack and then remove the tire. After that, use the 12mm wrench to remove the 2 screws holding the brake pad in place. Once the screws are removed, take out the brake pad, then remove the brake pads. We recommend cleaning the disc and supports before installing the new pads. Next, install the new pads, reinsert the caliper into its housing, reinsert and tighten the previously removed screws, and remount the tire.

Posted on 15 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Brake Pads of the Mazda CX-5
Replacing the Rear Brake Pads of the Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) Today, in this video tutorial, learn how to remove and replace the rear brake pads of the Mazda CX-5 in simple and quick steps. First, lift the vehic…
How to Replace the Front Brake Pads on a Mazda CX-5
How to Replace the Front Brake Pads on a Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) This guide shows how to replace the front brake pads on a Mazda CX-5 Mk1. The first step is to loosen the wheel bolts on the side you are working on;…
How to Replace the Front Brake Pads on a Mazda CX-5?
How to Replace the Front Brake Pads on a Mazda CX-5?
Mazda CX-5 (2017-2024 / MK 2) To replace the front brake pads on a Mazda CX-5, lift the car with a jack so that the wheel corresponding to the pads being replaced is off the groun…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos