Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Intake Manifold Gasket

Model: Mazda Mx 5 MK 2, NB - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Cylinder head

See other generations:
Video tutorial

Replacing the intake manifold gasket is quite straightforward, especially since there is enough space in the engine compartment to comfortably disassemble and manoeuvre; essentially, you need to unscrew the fastening bolts of the manifold from the cylinder head, freeing it from the cooling hoses to move it away; once the manifold is removed, take off the old gasket, clean the surfaces of both the manifold and the cylinder head, and apply the new gasket ensuring it adheres perfectly; finally, reposition the manifold and tighten the respective fastening bolts.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

Removal and Replacement of the Intake Manifold
Removal and Replacement of the Intake Manifold
Mazda Mx 5 (1998-2005 / MK 2, NB) This tutorial explains how to remove and replace the intake manifold on a Mazda MX-5. Open the bonnet and disconnect the negative terminal of the bat…
Removing the Intake Manifold on Mazda MX-5
Removing the Intake Manifold on Mazda MX-5
Mazda Mx 5 (1989-1997 / MK 1) In this video tutorial, learn how to remove the intake manifold on a Mazda MX-5 produced from 1990 to 1993. First, disconnect the throttle cable from…
Removing the Starter Motor
Removing the Starter Motor
Mazda Mx 5 (1998-2005 / MK 2, NB) Removing the starter motor on this car model is not exactly straightforward due to its position at the rear of the engine beneath the intake manifold…

How to Reset the EDC Light on a Mercedes Sprinter?

When the EDC light appears on the instrument cluster of a Mercedes Sprinter, it indicates a generic malfunction in the vehicle's injection system. To identify the source of the problem, a diagnosis must be performed at a workshop. This will help identify the damaged component, which will need to be replaced or repaired. Once the issue has been physically addressed, connect a diagnostic tool to the vehicle's OBD port located under the steering column. This will allow you to clear the errors in the ECU, turning off the EDC light.

Watch the video!


by ScegliAuto

More videos