Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mx 5
    4. : Sports-type engine air filter cleaning

Mazda Mx 5 - Video tutorial

Model: Mazda Mx 5 NB, MK 2 - Years 1998-2005
Part: Air filter
Operation: Sports-type engine air filter cleaning

If the car is equipped with a sports-type engine air filter, it is a type of filter made of cotton fibers wrapped in a special metal mesh; this type of filter allows you to increase the amount of air sucked in by the engine with a moderate increase in performance; in addition to the performance aspect, it must be taken into consideration that this type of filter must not be replaced but washed with the appropriate detergent with the sole recommendation not to use compressed air; therefore, once the filter has been disassembled, remove the dirt residues with a brush and then sprinkle it with the special detergent and rinse it with water only, letting it dry; once dry, spray the special oil which allows to retain dirt.


Posted on 3 September 2023 by ScegliAuto



Replacement oil filter and Mazda Mx-5 engine oil
Mazda Mx 5 (2005-2015 / NC, MK 3) In this video tutorial we will see how to change the engine oil and oil filter of a Mazda Mx-5. First we go to lift the car, going to unscrew the whe
Cleaning the engine intake ducts
Mazda Mx 5 (1998-2005 / NB, MK 2) There are many products on the market to clean the engine intake ducts: it involves starting the engine, letting it run at a speed between 2500 and 3
Engine oil and oil filter replacement
Mazda Mx 5 (1998-2005 / NB, MK 2) Open the front hood, unscrew the oil filler cap and pull the level check rod (this will make it easier to drain the used oil). Raise the car on suita

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos