Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine air filter of the 2017 Mazda MX5

Model: Mazda Mx 5 MK 4, ND - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Air filter

See other generations:
Video tutorial

If it is time to replace the engine air filter of your Mazda MX5 (year 2017), but you do not know how to do it, then all you need to do is carefully read the following guide and follow the procedure described. First of all, lift the front hood of the vehicle and then place the appropriate safety support.

Once you have done that, you can focus on the engine compartment and in particular on the box located in the lower central part. This box is the one that contains the engine air filter of your Mazda MX5, so you just need to remove the protective cover to replace the old filter with a new one of the same type.


Posted on 23 March 2025 by ScegliAuto


Related tutorials

How to reset the service indicator on the 2017 Mazda MX5
How to reset the service indicator on the 2017 Mazda MX5
Mazda Mx 5 (2015-2024 / MK 4, ND) Manually resetting the service light of your 2017 Mazda MX5 is really easy. In this new mini guide of ours, you will find all the steps you need to f…
How to reset the service indicator on the Mazda MX5
How to reset the service indicator on the Mazda MX5
Mazda Mx 5 (2015-2024 / MK 4, ND) To complete the manual reset of the service light on your latest model Mazda MX5, you must follow all the steps described in the following guide addr…
How to Replace the Hood on a Mazda MX5?
How to Replace the Hood on a Mazda MX5?
Mazda Mx 5 (1989-1997 / MK 1) To replace the hood on a Mazda MX5, first clean the rear section and especially the seal where the new cover will be attached. At this point, positio…

How to Reset the EDC Light on a Mercedes Sprinter?

When the EDC light appears on the instrument cluster of a Mercedes Sprinter, it indicates a generic malfunction in the vehicle's injection system. To identify the source of the problem, a diagnosis must be performed at a workshop. This will help identify the damaged component, which will need to be replaced or repaired. Once the issue has been physically addressed, connect a diagnostic tool to the vehicle's OBD port located under the steering column. This will allow you to clear the errors in the ECU, turning off the EDC light.

Watch the video!


by ScegliAuto

More videos