Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulb on a Mazda Premacy

Model: Mazda Premacy CP - Years 1999-2014
Part: Tail light bulb

To discover how to replace the rear headlamp bulb on your Mazda Premacy, read this guide carefully and follow the instructions. First, park the car safely and ensure it is completely turned off. Next, lift the boot and remove the screws securing the headlamp that needs replacing. Once done, pull the headlamp towards you and remove the faulty bulb. Finally, insert the new bulb and refit everything correctly.

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Pads on a Mazda Premacy
How to Replace the Rear Brake Pads on a Mazda Premacy
Mazda Premacy (1999-2014 / CP) This guide shows you the steps to remove and replace the rear brake pads on a Mazda Premacy. First, lift the vehicle and start by removing the rear w…
Where to Find the Fuse Box on the Mazda Premacy
Where to Find the Fuse Box on the Mazda Premacy
Mazda Premacy (1999-2014 / CP) By following these simple steps, you will be able to locate all the various fuses present in your Mazda Premacy in just a few seconds. First, enter t…
How to Remove the Fuel Pump in a Mazda Premacy?
How to Remove the Fuel Pump in a Mazda Premacy?
Mazda Premacy (1999-2014 / CP) One of the issues related to the engine warning light could be the fuel pump, which applies to all types of vehicles. If you are certain of this and …

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos