Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on a Mazda Premacy

Model: Mazda Premacy CP - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Brake pads

Video tutorial

This guide shows you the steps to remove and replace the rear brake pads on a Mazda Premacy. First, lift the vehicle and start by removing the rear wheel; then, unscrew the bolts securing the brake caliper to remove it from the disc, as shown in the video.

At this point, remove and replace the brake pads with new ones, cleaning the caliper of any residual dirt; apply pressure to the caliper piston and then refit the braking system by following the reverse procedure!


Updated on 25 August 2026 by ScegliAuto


Related tutorials

Where to Find the Fuse Box on the Mazda Premacy
Where to Find the Fuse Box on the Mazda Premacy
Mazda Premacy (1999-2014 / CP) By following these simple steps, you will be able to locate all the various fuses present in your Mazda Premacy in just a few seconds. First, enter t…
How to Replace the Rear Headlamp Bulb on a Mazda Premacy
How to Replace the Rear Headlamp Bulb on a Mazda Premacy
Mazda Premacy (1999-2014 / CP) To discover how to replace the rear headlamp bulb on your Mazda Premacy, read this guide carefully and follow the instructions. First, park the car s…
How to Remove the Fuel Pump in a Mazda Premacy?
How to Remove the Fuel Pump in a Mazda Premacy?
Mazda Premacy (1999-2014 / CP) One of the issues related to the engine warning light could be the fuel pump, which applies to all types of vehicles. If you are certain of this and …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos