Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the low beam bulbs in the Mercedes CLA?

Model: Mercedes CLA C117, X117 - Years 2013-2019
Part: Headlight bulb

In this tutorial we can see how to replace the low beam bulbs in the Mercedes CLA, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can operate safely, then turn the wheel inward towards the side where you will be working. Next, locate the door located in the lower inner area of the wheel arch, open it and unscrew the large circular cap. At this point, we can disconnect the power connector, remove the bulb by rotating it counterclockwise and install the replacement.

Posted on 20 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front headlight bulb of the Mercedes CLA
Replacement of the front headlight bulb of the Mercedes CLA
Mercedes CLA (2013-2019 / C117, X117) Below we will discover the instructions on how to disassemble and replace the headlight bulb of the Mercedes CLA. In order to access the headlight bu…
Replacing the Low Beam Bulb on the Mercedes CLA
Replacing the Low Beam Bulb on the Mercedes CLA
Mercedes CLA (2013-2019 / C117, X117) In this brief guide, learn how to remove and replace the xenon low beam bulb in the front headlight of the Mercedes CLA by following these simple ste…
How to Replace the Headlight Bulbs in a Mercedes CLA?
How to Replace the Headlight Bulbs in a Mercedes CLA?
Mercedes CLA (2013-2019 / C117, X117) As seen in this tutorial, replacing the headlight bulbs in a Mercedes CLA is an extremely simple and quick task. Before proceeding, ensure the key is…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos