Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. CLA
    4. : How to replace the front headlight bulbs in the Mercedes CLA?

Mercedes CLA - Video tutorial

Model: Mercedes CLA X117, C117 - Years 2013-2019
Part: Headlight bulb
Operation: How to replace the front headlight bulbs in the Mercedes CLA?

As we can see in this tutorial, replacing the front headlight bulbs in the Mercedes CLA is an extremely simple and quick operation. Before proceeding, make sure that the key is not inserted. Let's start by turning the wheel towards the inside of the side where we will be working, then open the door located in the front area of the fender. Next, remove the circular cap that has just been released, grip the old bulb and extract it from the headlight by rotating it slightly counterclockwise. At this point, we can disconnect the connector and install the replacement.


Posted on 17 August 2023 by ScegliAuto



How to replace the headlight bulbs on a Mercedes Cla
Mercedes CLA (2013-2019 / X117, C117) Let's see how to replace the headlight bulbs on a Mercedes Cla. Remove the plastic lining in the lower part of the mudguard with a suitable screwdriv
Removing the headlight bulbs of a Mercedes Cla
Mercedes CLA (2013-2019 / X117, C117) Let's see the disassembly of the headlight bulbs of a Mercedes Cla. Remove the plastic covering in the lower part of the bumper with a suitable screw
How to replace the bulb of the Mercedes Cla
Mercedes CLA (2013-2019 / X117, C117) How to replace the headlight bulb on a Mercedes Cla? We move the front wheel and intervene in the stone guard of the car. We remove the plastic cover

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos