Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Stereo in a Mercedes B-Class

Model: Mercedes Classe B MK 1, W245 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Car stereo

See other generations:
Video tutorial

This operation involves some work on the electrical circuit, so to protect any more delicate circuits, disconnect the battery cables to work safely. To remove the stereo, you need to take off the panels above and below it. This way, you can unscrew the screws securing the stereo and pull it out to access the connectors at the back.

After disconnecting them, proceed with the installation of the new stereo, retracing the steps described for reassembling the various components.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

How to Remove the Original Radio from the Mercedes B-Class W246
How to Remove the Original Radio from the Mercedes B-Class W246
Mercedes Classe B (2011-2019 / MK 2, W246) .. to remove the original radio from the Mercedes B-Class W246, second series, in simple and quick steps. First, get inside the vehicle and start by removing.. …
How to Replace the Radio in the Mercedes-Benz B-Class
How to Replace the Radio in the Mercedes-Benz B-Class
Mercedes Classe B (2011-2019 / MK 2, W246) .. the original radio in the Mercedes-Benz B-Class, following the instructions below. First, get inside the vehicle and start by removing the air.. …
How to Replace the Radio in a Mercedes-Benz B-Class W245
How to Replace the Radio in a Mercedes-Benz B-Class W245
Mercedes Classe B (2005-2011 / MK 1, W245) .. how to replace the radio in a Mercedes-Benz B-Class W245. The only tool required is a flathead screwdriver. First, disconnect the battery located in.. …

    Frequently Asked Questions

    • Classe B 2005-2011 - Where is the AUX cable located on Mercedes B-Class? Read answer

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos