Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe B
    4. : How to replace the Mercedes B-Class car radio

Mercedes Classe B - Video tutorial

Model: Mercedes Classe B MK 2, W246 - Years 2011-2019
Part: Car stereo
Operation: How to replace the Mercedes B-Class car radio

In today's video tutorial we will see how to disassemble and replace the original Mercedes B-Class car radio, following the instructions below. First of all, we get on board the car and start by removing the air vents, using a pointed lever; then let's unscrew the screws that we find inside, as shown in the video. At this point we remove the plastic of the central instrumentation; then extract the car radio, disconnecting all the electrical connectors on the back. Now let's proceed with the reassembly, applying the reverse procedure!


Posted on 20 December 2022 by ScegliAuto



How to disassemble the car radio in a Mercedes B Class?
Mercedes Classe B (2005-2011 / MK 1, W245) Disassembling the car radio in the Mercedes Classe B, as we can see in this tutorial, is an extremely simple and fast operation. Before doing so, mak
How to disassemble the original car stereo of the Mercedes B-Class W246
Mercedes Classe B (2011-2019 / MK 2, W246) In this video we will see how to disassemble the original car stereo of the Mercedes B-Class W246, second series, in simple and quick steps. First of
How to update the navigation software on Mercedes A-Class - B-Class
Mercedes Classe B (2011-2019 / MK 2, W246) Today we will see how to update the navigation software and maps on a second generation Mercedes A-Class and B-Class. In order to update the software

    Frequently Asked Questions

    • Classe B 2005-2011 - Where is the AUX cable located on Mercedes B-Class? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos