Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Seat Belt Pillars on the Mercedes A-Class

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018

See other generations:
Video tutorial

Removing the seat belt pillars on a Mercedes A-Class model W176 3 is a straightforward task and necessary if the seat belts are stuck or completely out. To remove the side pillar, insert a plastic tool into the side holes to pry it off without damaging the body.

Push upward and remove the pillar.

Now you can perform the necessary maintenance on the seat belts by applying some oil and adjusting the retractor, then reinstall the pillar.


Updated on 29 October 2026 by ScegliAuto


Related tutorials

How to Remove the Seat Belt Pillars on a Mercedes A-Class
How to Remove the Seat Belt Pillars on a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. To remove the seat belt pillar on a Mercedes A-Class model W 176, use a flathead screwdriver or a plastic trim removal tool. Insert the tool at the.. …
How to adjust the seats of the Mercedes A-Class
How to adjust the seats of the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. how to position the seats of the Mercedes A-Class, after folding them onto themselves to expand the trunk space. The Mercedes we will use as an example.. …
How to Install a Front Dash Cam on the Mercedes A-Class
How to Install a Front Dash Cam on the Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. to install a front dash cam on the Mercedes A-Class. First, obtain a dash cam suitable for your vehicle. Position the camera on the windshield or behind.. …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos