Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Seat Belt Pillars on a Mercedes A-Class

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

To remove the seat belt pillar on a Mercedes A-Class model W 176, use a flathead screwdriver or a plastic trim removal tool. Insert the tool at the base of the pillar and move it upward to disengage the internal clips.

Be careful not to damage the clips as you remove the plastic covers. Once this is done, you can proceed to remove the seat belt if necessary or rewind it if it is jammed.

For installation, simply push inward on the pillar to engage the clips.


Posted on 23 February 2026 by ScegliAuto


Related tutorials

How to Remove the Seat Belt Pillars on the Mercedes A-Class
How to Remove the Seat Belt Pillars on the Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. Removing the seat belt pillars on a Mercedes A-Class model W176 3 is a straightforward task and necessary if the seat belts are stuck or completely.. …
How to Install a Front Dash Cam on the Mercedes A-Class
How to Install a Front Dash Cam on the Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. to install a front dash cam on the Mercedes A-Class. First, obtain a dash cam suitable for your vehicle. Position the camera on the windshield or behind.. …
Removing Rear Seats on Mercedes A-Class
Removing Rear Seats on Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) First, gently remove the plastic clips located at the corners of the rear seats. Then, disengage the seats by pulling them upward with some force, as…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

    Frequently Asked Questions

    • Classe A 2012-2018 - Why does the instrument cluster not turn on in the Mercedes A-Class? Read answer
    • Classe A 2012-2018 - Where is the exterior temperature sensor of the Mercedes A-Class located? Read answer
    • Classe A 2018-2026 - Where is the Mercedes A-Class jack located? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Compass?

To reset the tyre pressure warning light on the Jeep Compass, inflate all tyres to the correct pressure value, which is indicated on the sticker affixed to the driver’s door pillar. Once all tyres are at this pressure, switch on the ignition and press and hold the corresponding button located to the left of the steering wheel. This will turn off the warning light, but to prevent it from reactivating, you must reset the system using an OBD scanner connected to the designated port.

Watch the video!


by ScegliAuto

More videos