Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the license plate light bulbs in the Mercedes ML 350?

Model: Mercedes Classe M W164 - Years 2005-2011
Part: License plate light

In this tutorial we can see how to replace the license plate light bulbs in the Mercedes ML 350, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can operate safely, then open the trunk door slightly, locate the light in question and, using a simple cross-tipped screwdriver, unscrew the two fixing screws. At this point, remove the bulb holder from the housing, disconnect the bulb, connect the replacement and reassemble everything following the reverse procedure.

Posted on 18 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Dipped Beam Bulbs on a Mercedes ML 350?
How to Replace the Dipped Beam Bulbs on a Mercedes ML 350?
Mercedes Classe M (2005-2011 / W164) As shown in this tutorial, replacing the dipped beam bulbs on a Mercedes ML 350 is an extremely simple and quick operation. Before proceeding, ensure…
How to Replace the Auxiliary Battery of the Mercedes ML 350?
How to Replace the Auxiliary Battery of the Mercedes ML 350?
Mercedes Classe M (2005-2011 / W164) To replace the auxiliary battery of the Mercedes ML 350, open the tailgate to access the boot area. Grasp the handle to lift the carpet from the base…
How to Replace the Auxiliary Battery on the Mercedes ML 350?
How to Replace the Auxiliary Battery on the Mercedes ML 350?
Mercedes Classe M (1997-2005 / W163) To replace the auxiliary battery on the Mercedes ML 350, push the front passenger seat all the way forward. Underneath, there will be a cover that ne…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos