Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulbs on a Mercedes ML 350?

Model: Mercedes Classe M W164 - Years 2005-2011
Part: Headlight bulb

As shown in this tutorial, replacing the dipped beam bulbs on a Mercedes ML 350 is an extremely simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by opening the bonnet, then locate the large cap at the back of the headlamp in question and unscrew it. Next, release the two clips securing the bulb holder, remove it from the housing, and separate it from the old bulb. At this point, you can insert the replacement, avoiding touching the glass, and reassemble everything by following the reverse procedure.

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Auxiliary Battery of the Mercedes ML 350?
How to Replace the Auxiliary Battery of the Mercedes ML 350?
Mercedes Classe M (2005-2011 / W164) To replace the auxiliary battery of the Mercedes ML 350, open the tailgate to access the boot area. Grasp the handle to lift the carpet from the base…
How to replace the license plate light bulbs in the Mercedes ML 350?
How to replace the license plate light bulbs in the Mercedes ML 350?
Mercedes Classe M (2005-2011 / W164) In this tutorial we can see how to replace the license plate light bulbs in the Mercedes ML 350, an extremely simple and quick operation. First of al…
Location of the Fuse Boxes in the Mercedes ML 350
Location of the Fuse Boxes in the Mercedes ML 350
Mercedes Classe M (2011-2018 / W166) When working on the electrical components of the Mercedes ML 350, you need to know the location of the three fuse boxes to perform the necessary chec…

How to reset the tire pressure sensor of the Hyundai Tucson

Below we will discover the instructions that will allow us to reset the tire pressure warning light (TPMS) of the Hyundai Tucson. First of all, we get into the car and turn on the instrument panel; then we go to the vehicle settings until we reach the tire pressure monitor, identifying the tire with the incorrect pressure. At this point, we proceed to restore all tire pressures, following the pattern indicated on the label; in this way the TPMS system will be reset and the warning light will be reset by the instrument panel!

Watch the video!


by ScegliAuto

More videos