Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Mercedes A-Class

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

How to remove the door panel on a Mercedes A-Class? Don't worry, let's see how to proceed in this video. Before starting the disassembly, disconnect the battery terminals located in the engine compartment.

Start the disassembly: use a pry tool to remove the plastic at the corner of the window, then remove the plastic around the handle. Use a screwdriver to remove the securing screws located in the plastic handle.

Once all screws are removed, use the pry tool to detach all the plastic clips that hold the door panel. Pull the door panel off with your hands, disconnect any power connectors and release cable.

Perform necessary maintenance on the door.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of the Mercedes A-Class?
How to Remove the Door Panel of the Mercedes A-Class?
Mercedes Classe A (2018-2026 / W177) .. To remove the door panel of the Mercedes A-Class, loosen the screws that secure it: these are located to the right of the inner handle and underneath.. …
How to Remove the Rear Door Panel on the Mercedes A-Class W176
How to Remove the Rear Door Panel on the Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. to remove the rear door panel on the Mercedes A-Class W176, third generation, by following the instructions below. First, open the rear door of your.. …
How to Remove the Rear Door Panel of the Mercedes Benz A-Class W176
How to Remove the Rear Door Panel of the Mercedes Benz A-Class W176
Mercedes Classe A (2012-2018 / W176) .. the rear door panel of the Mercedes Benz A-Class W176. The first step is to remove the chrome trim panel of the armrest using a trim removal tool... …

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Nissan Qashqai

Hello everyone! Today, I will explain how to reset the important AdBlue additive warning light on your Nissan Qashqai. Reset via the dashboard menu: turn on the car and ensure the instrument cluster is active. Scroll through the menu until you find the option “Service” or “AdBlue”. Select the “Reset” option and confirm. To top up the AdBlue level, open the tank flap and use the supplied nozzle to refill the AdBlue fluid with the engine off. Once the car is turned off and back on, the warning light should disappear if the refill was successful. Good luck.

Watch the video!


by ScegliAuto

More videos