Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel on the Mercedes A-Class W176

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

In this short and simple video, see how to remove the rear door panel on the Mercedes A-Class W176, third generation, by following the instructions below. First, open the rear door of your car and remove the plastic covers found on the panel, including the one for the grab handle; then, unscrew all the fastening screws located underneath using a Torx screwdriver, as shown in the video.

At this point, start prying on the sides of the panel to remove it, disconnecting the cables located on the back!


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Door Panel of the Mercedes Benz A-Class W176
How to Remove the Rear Door Panel of the Mercedes Benz A-Class W176
Mercedes Classe A (2012-2018 / W176) .. the rear door panel of the Mercedes Benz A-Class W176. The first step is to remove the chrome trim panel of the armrest using a trim removal tool... …
How to Remove the Factory Radio from a Mercedes-Benz A-Class W176
How to Remove the Factory Radio from a Mercedes-Benz A-Class W176
Mercedes Classe A (2012-2018 / W176) .. remove the factory radio from a Mercedes-Benz A-Class W176 by following these simple steps. First, get inside the vehicle and start by removing the air.. …
Where is the OBD port located on the Mercedes Class A W176?
Where is the OBD port located on the Mercedes Class A W176?
Mercedes Classe A (2012-2018 / W176) If you are looking to find the OBD port located inside the cabin of your Mercedes Class A W176, all you have to do is read the following guide and fo…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos