Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port located on the Mercedes Class A W176?

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

If you are looking to find the OBD port located inside the cabin of your Mercedes Class A W176, all you have to do is read the following guide and follow the instructions. First, open the driver's side door and enter the vehicle, then shift your attention to the bottom of the dashboard.

At this point, locate the small protective cover next to the OBD port and remove it with your hands. This way, you finally have access to the OBD port of your Mercedes Class A W176 and you are done.


Posted on 20 October 2025 by ScegliAuto


Related tutorials

Where to Find the OBD Port on the Mercedes A-Class W176
Where to Find the OBD Port on the Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) If you own a Mercedes A-Class W176 (2012-2018) and want to find the OBD port to connect a diagnostic tool, follow these steps. First, ensure your Mer…
Where to Find the OBD Port on Mercedes A-Class W176
Where to Find the OBD Port on Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) In this new guide for all of you with a Mercedes A-Class W176 (2012-2018), we will discover where the OBD port is located and how to use it independe…
Where to Find the OBD Port of the Mercedes A-Class W176
Where to Find the OBD Port of the Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) If you are looking for the OBD port in your Mercedes A-Class W176 (model years 2012-2018), follow the steps outlined in this guide. First, ensure the…

    Frequently Asked Questions

    • Classe A 2012-2018 - Where is the exterior temperature sensor of the Mercedes A-Class located? Read answer
    • Classe A 2018-2026 - Where is the Mercedes A-Class jack located? Read answer

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos