Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to recharge or replace the battery of the Mercedes Vito

Model: Mercedes Vito MK 2, W639 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Battery

See other generations:
Video tutorial

Below are the main instructions for replacing or recharging the battery of the Mercedes Vito. First, we open the front door on the driver's side and start disassembling and removing the plastic cover found under the front seat on the passenger side, unscrewing the fastening screws; this will allow access to the battery compartment, as shown in the video.

We connect the clamps if we want to recharge, or disconnect the clamps if we want to remove and replace the battery with a new one (making sure to use the same amperage).


Posted on 5 February 2025 by ScegliAuto


Related tutorials

How to replace the battery of the Mercedes Vito
How to replace the battery of the Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) The battery of the Mercedes Vito, unlike other Mercedes vehicles, is located inside the cabin specifically under the passenger seat. To replace the b…
How to Remove the Battery from a Mercedes Vito
How to Remove the Battery from a Mercedes Vito
Mercedes Vito (2003-2013 / MK 2, W639) Before starting, open the driver’s door of your Mercedes Vito. Begin by prising off and removing the side cover of the battery. Next, unscrew and loo…
How to replace the battery of the remote control for the Mercedes Vito van?
How to replace the battery of the remote control for the Mercedes Vito van?
Mercedes Vito (2003-2013 / MK 2, W639) In this tutorial, we will see how to replace the battery of the remote control for the Mercedes Vito van, a very simple and quick operation. To do th…

    Frequently Asked Questions

    • Vito 2014-2024 - Where is the Mercedes Vito auxiliary battery located? Read answer

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos