Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front passenger presence sensor of the Mercedes A-Class

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018

See other generations:
Video tutorial

In this guide we will discover the steps related to disassembling and replacing the front passenger presence sensor of the Mercedes Classe A. First of all, we get on board the car and start moving the front seat back; then we disconnect the electrical connector and remove the passenger presence sensor, replacing it with the new original one, as shown in the video.

At this point, we verify the correct functioning of the sensor, checking the operation of the airbag (the light should turn off when a person is present, thus enabling the airbag); we reset the warning light with diagnostic software if present.


Posted on 19 March 2025 by ScegliAuto


Related tutorials

Deactivation of the front passenger airbag on the Mercedes A-Class
Deactivation of the front passenger airbag on the Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. understand how the airbag system of the Mercedes Classe A works. In this type of vehicle, the passenger airbag is activated and deactivated automatically,.. …
How to Disable the Front Passenger Airbag on a Mercedes A-Class
How to Disable the Front Passenger Airbag on a Mercedes A-Class
Mercedes Classe A (2018-2026 / W177) .. the front passenger airbag on a Mercedes A-Class. Like most models from the manufacturer, the front passenger airbag is automatically activated.. …
How to Replace the Engine Speed Sensor on Mercedes A-Class
How to Replace the Engine Speed Sensor on Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. to replace the engine speed sensor on Mercedes A-Class: lift the front hood and secure it with the prop rod. Locate the engine speed sensor; using a socket.. …

How to Activate the Cruise Control on the Toyota Yaris?

To activate the cruise control on the Toyota Yaris, start the engine by turning the key in the ignition switch. Once the engine is running, press the accelerator pedal until you reach the desired speed. Then, press the button on the right side of the steering wheel to activate the cruise control. You can also adjust the cruising speed by lifting the switch to increase it and lowering the switch to decrease it.

Watch the video!


by ScegliAuto

More videos