Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the Mercedes Citan?

Model: Mercedes Citan MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Fuse box

See other generations:
Video tutorial

The fuses of the Mercedes Citan are no exception, so they are also located in fuse boxes. But where can we find these boxes? They are installed in two different places, the first is located in the engine compartment, on the side of the 12-volt power supply battery of the vehicle, while the second is housed on the left side of the steering wheel, at the bottom.

Both come with their own very useful diagram, which greatly simplifies fault finding, indicating in detail where each fuse is located and for which utility it has been used, brakes, ABS, and so on.


Posted on 1 June 2025 by ScegliAuto


Related tutorials

Where are the fuses located on the Mercedes Citan?
Where are the fuses located on the Mercedes Citan?
Mercedes Citan (2012-2020 / MK 1) On the Mercedes Citan, the fuses are divided within the designated fuse boxes installed on the vehicle: in this model, you will find two boxes for co…
Where are the fuses located in the Mercedes Citan?
Where are the fuses located in the Mercedes Citan?
Mercedes Citan (2012-2020 / MK 1) All the fuses of the Mercedes Citan are responsible for managing the operation of the devices that are installed on the vehicle: in this type of vehi…
Where are the Fuses on the Mercedes Citan?
Where are the Fuses on the Mercedes Citan?
Mercedes Citan (2012-2020 / MK 1) On the Mercedes Citan, the fuses are contained within dedicated fuse boxes installed in the vehicle: in this model, you can find two boxes. The first…

Other guides you may be interested in

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos