Do it yourself
Frequently asked questions about cars and motorcycles

Localization and diagram of the fuse boxes of the Mercedes Vito/Viano W639.

Model: Mercedes Vito W639, MK 2 - Years 2003-2013
Part: Fuse box

In this video we see the location and diagram of the fuse boxes of the Mercedes Vito (with seats) and Viano (van). The main fuse box is located in the engine compartment, and is always located in front of the passenger side, whether it is right-hand drive or left-hand drive. In front of the main fuse box, there are two smaller rectangular boxes, named F34 and F35. The fuses for the power outlets are located in the main fuse box #18 (cigarette lighter) #28 rear compartment outlet in block F34; in block F35 we find the 12-volt outlet for the cabin #21 #22, the #40 right rear 12-volt outlet. Another fuse box can be found under the driver's seat.

Posted on 30 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Vito (2003-2013 / W639, MK 2) In this brief guide we will see the electrical diagram and layout of the fuse boxes of the Mercedes Vito and Viano. First of all, we open the vehicle…
Mercedes Vito (2003-2013 / W639, MK 2) In this video, you will find the fuse diagram for the Mercedes Vito W639, along with a link to the website where you can consult it in any language a…
Mercedes Vito (2003-2013 / W639, MK 2) In this short guide, we will look at the information needed to access the fuse boxes of the Mercedes Vito and Viano, including the fuse diagram and l…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos