Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cabin air filter of the Mercedes Vaneo.

Model: Mercedes Vaneo MK 1 - Years 2001-2005
Part: Cabin air filter

The instructions in this guide will show us how to disassemble and replace the cabin air filter or pollen filter of the Mercedes Vaneo. First, we open the hood of the car and start by removing the windshield wiper arms, unscrewing the nuts located at the base; we remove the plastic cover found underneath, in order to access the pollen filter cartridge, as shown in the video. At this point, we replace the cabin air filter, inserting it in the correct direction; we reassemble the plastic partition and finally the windshield wiper arms.

Posted on 19 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Mercedes Vaneo (2001-2005 / MK 1) This video explains how to replace the cabin air filter of a Mercedes Vaneo. The filter is located in the engine bay. First, remove the ventilation g…
How to Replace the Key Fob Battery of the Mercedes Vaneo Van?
How to Replace the Key Fob Battery of the Mercedes Vaneo Van?
Mercedes Vaneo (2001-2005 / MK 1) In this tutorial, see how to replace the battery of the Mercedes Vaneo van key fob, a very simple and quick operation. To do this, you will need a sm…
What is the fuse diagram for the Mercedes Vaneo?
What is the fuse diagram for the Mercedes Vaneo?
Mercedes Vaneo (2001-2005 / MK 1) In this video, you can see the fuse diagram and the location of the respective boxes for the Mercedes Vaneo, useful if you need to check the fuse of …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos