Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Windscreen Washer Reservoir on Mercedes CLS

Model: Mercedes CLS MK 2, C218 - Years 2010-2018

These brief and simple steps will show you how to remove and replace the windscreen washer reservoir on a Mercedes CLS. First, lift the vehicle and start by removing the front wheel and the plastic cover under the windscreen washer reservoir; then disconnect the fluid cables and the electrical connector of the washer pump, as shown in the video. At this point, remove and replace the damaged washer reservoir with the new one, securing it properly with screws; refit the washer pump and top up with fluid, checking its operation!

Posted on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes CLS (2010-2018 / MK 2, C218) In case of sudden malfunction of the windscreen wipers on the Mercedes CLS, first check the status of the respective fuses, whose positions are indic…
Mercedes CLS (2004-2010 / C219, MK 1) In the Mercedes CLS, any fuse will be located inside one of the respective fuse boxes mounted on the vehicle: in this type of car, there are three bo…
Mercedes CLS (2004-2010 / C219, MK 1) Each fuse in the Mercedes CLS is located inside one of the designated fuse boxes installed in the vehicle: in this type of vehicle, you can find thre…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos