Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Windscreen Wiper Fuse Located in the Mercedes CLS?

Model: Mercedes CLS C218, MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Windshield wipers

See other generations:
Video tutorial

In case of sudden malfunction of the windscreen wipers on the Mercedes CLS, first check the status of the respective fuses, whose positions are indicated in this video. As shown, the fuse for the front wipers is located in the box inside the engine compartment, on the driver's side, and is labelled F10. The fuse for the rear wiper is located in the box on the right side of the boot and is labelled F38. If a fuse is blown, ensure you always use a replacement with the same specifications.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

Where are the fuses located in the Mercedes CLS?
Where are the fuses located in the Mercedes CLS?
Mercedes CLS (2004-2010 / C219, MK 1) Each fuse in the Mercedes CLS is located inside one of the designated fuse boxes installed in the vehicle: in this type of vehicle, you can find thre…
Where are the fuses located in the Mercedes CLS?
Where are the fuses located in the Mercedes CLS?
Mercedes CLS (2004-2010 / C219, MK 1) In the Mercedes CLS, any fuse will be located inside one of the respective fuse boxes mounted on the vehicle: in this type of car, there are three bo…
Where are the fuses located in the Mercedes CLS?
Mercedes CLS (2010-2018 / C218, MK 2) The fuses in the Mercedes CLS are located within the designated fuse boxes present in the vehicle: in this type of car, you can find two boxes for co…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos