Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on a Mercedes SLK

Model: Mercedes Slk MK 2, R171 - Years 2004-2011
Part: Shift knob

You can replace the gear knob on a Mercedes SLK by prying off the clips located at the base of the leather gaiter with an object. Once these are removed, you can lift the gaiter to locate the ring underneath that connects it to the knob. By widening this ring, you can detach the knob from the selector, allowing you to insert the new replacement part. The new part should be secured by tightening the ring onto the lever, and then you can reattach the clips at the base of the gaiter.

Posted on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Gear Selector Knob on Mercedes E, S, C, CL, ML, SLK, CLK
Removing the Gear Selector Knob on Mercedes E, S, C, CL, ML, SLK, CLK
Mercedes Slk (2004-2011 / MK 2, R171) In this short video tutorial, learn how to remove the gear selector knob on various Mercedes-Benz models, including the E, S, C, CL, ML, SLK, and CLK…
How to change the gear shift knob of the Mercedes SLK R171
How to change the gear shift knob of the Mercedes SLK R171
Mercedes Slk (2004-2011 / MK 2, R171) In this video we see how to change the gear knob of a Mercedes SLK R171: the first thing to do is to remove the base that holds the boot in place: be…
How to Set the Clock on the Mercedes SLK R170
How to Set the Clock on the Mercedes SLK R170
Mercedes Slk (1997-2004 / R170, MK 1) In this video, learn how to set the clock on the Mercedes SLK R170. Gently pull out the knob located between the two dials on the dashboard. Slightly…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos