Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the License Plate Holder on the Mercedes EQE SUV

Model: Mercedes EQE SUV MK 1 - Years 2022-2026

This guide provides instructions for installing the license plate holder on the Mercedes EQE SUV in simple steps. First, move to the front of the vehicle and begin installing the license plate holder bracket, making holes if necessary. Next, secure the license plate holder with the provided mounting screws, as shown in the video. Ensure the license plate holder is properly attached to the bumper, then proceed with installing the front license plate; similarly, install the rear license plate on the vehicle.

Posted on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery on a Mercedes EQE SUV?
How to Replace the Key Fob Battery on a Mercedes EQE SUV?
Mercedes EQE SUV (2022-2026 / MK 1) To replace the key fob battery on a Mercedes EQE SUV, slide the key out from the top of the fob: this will allow you to use it as a lever inside its …
What is the purpose of the side flap of the Mercedes EQE?
What is the purpose of the side flap of the Mercedes EQE?
Mercedes EQE SUV (2022-2026 / MK 1) In this video, we can see what the small flap on the left front fender is for, which is not the charging port, but the cap for the windshield washer …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos