Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Mercedes M-Class?

Model: Mercedes Classe M W166 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tire pressure warning light

See other generations:
Video tutorial

In this tutorial, you will see how to reset the tyre pressure light on a Mercedes M-Class, an extremely simple and quick operation, to be performed only after restoring the correct pressure in each tyre according to the instructions in the manual. First, go inside the cabin, then insert the key and turn on the instrument panel.

Next, navigate to the general menu using the right directional arrow, enter "Service", "Tyre Pressure", and scroll down the screen. At this point, simply press the "OK" button, confirm the reset, and complete the procedure by restarting the vehicle.


Posted on 23 September 2026 by ScegliAuto


Related tutorials

How to Reset the TPMS Light on a Mercedes M-Class
How to Reset the TPMS Light on a Mercedes M-Class
Mercedes Classe M (2011-2018 / W166) .. adjusting the tyre pressures on the Mercedes M-Class, you need to reset the TPMS light. To perform the reset, switch on the instrument cluster and press.. …
How do you reset the tire pressure warning light on the Mercedes M-Class?
How do you reset the tire pressure warning light on the Mercedes M-Class?
Mercedes Classe M (2011-2018 / W166) .. reset the tire pressure sensor of the Mercedes M-Class, you will need to inflate all the tires until they reach the recommended pressure value: this value.. …
How do you reset the tire pressure warning light on the Mercedes M-Class?
How do you reset the tire pressure warning light on the Mercedes M-Class?
Mercedes Classe M (2011-2018 / W166) .. tire pressure warning light of the Mercedes M-Class, you need to inflate the tires to the recommended pressure value: this value is indicated on the.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos