Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

The Fuse Diagram of the Mercedes CLA, Where to Find It?

Model: Mercedes CLA C118, X118 - Years 2019-2025
Part: Fuse box

The diagram that explains in detail how the fuses are used and where each one is located in the fuse box can be found both on the protective cover of the fuse boxes and in the vehicle's owner's manual. For those interested, it is also available in PDF format online. One last clarification regarding the fuse boxes: there are two of them, located in two different places, namely in the engine compartment near the 12-volt battery that powers the vehicle, and in the cabin, under the glove compartment on the passenger side.

Posted on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to access the external fuse box of the Mercedes CLA
How to access the external fuse box of the Mercedes CLA
Mercedes CLA (2013-2019 / C117, X117) In this short guide, we will see the instructions that will allow us to access the external fuse box of the Mercedes CLA. First, we open the car's en…
What is the Fuse Diagram for the Mercedes CLA?
Mercedes CLA (2013-2019 / C117, X117) If a device in your Mercedes CLA suddenly stops working, first check the status of the related fuses, which are shown in this video. As shown, the fi…
What is the Fuse Diagram for the Mercedes CLA?
What is the Fuse Diagram for the Mercedes CLA?
Mercedes CLA (2013-2019 / C117, X117) If any devices in your Mercedes CLA suddenly stop working, first check the status of the corresponding fuses, which are shown in this video. The firs…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos