Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. CLS
    4. : Removing the headlight of a Mercedes Cls

Mercedes CLS - Video tutorial

Model: Mercedes CLS C219, MK 1 - Years 2004-2010
Part: Headlight
Operation: Removing the headlight of a Mercedes Cls

We replace the Mercedes headlight if it is damaged, let's see how it is disassembled. We open the front hood of the car, unscrew the locking pins on the headlight bar with a socket wrench or cordless screwdriver. At this point we will find other pins in the lower part of the lighthouse, let's unscrew them from the metal plates. We detach the front bumper from the vehicle. We detach the headlight and after the lamp holders, we extract the same from the car body. We assemble the new headlight with the new bulbs if damaged and (always suitable type and size) we insert the headlight in its housing. Finally we tighten the pins of the lighthouse with the socket wrench. We mount the front bumper.


Posted on 30 November 2023 by ScegliAuto



How to replace the headlight bulb on the Mercedes CLS?
Mercedes CLS (2004-2010 / C219, MK 1) In order to replace the headlight bulb of the Mercedes CLS, you need to open the hood to access the engine compartment and locate the rear part of th
How to replace the rear light bulb on the Mercedes CLS?
Mercedes CLS (2004-2010 / C219, MK 1) In order to replace the rear light bulb on the Mercedes CLS, you need to remove the rivets that secure the plastic covers that wrap around the perime
How to remove the headlight on Mercedes Cls
Mercedes CLS (2004-2010 / C219, MK 1) Do we want to replace the damaged taillight? Let's see how to remove the headlight of a Mercedes Cls. We open and lift the tailgate, remove the plast

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos