Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Spoiler from Mercedes A-Class

Model: Mercedes Classe A W176 - Years 2012-2018

In this video tutorial, you will learn how to remove the rear spoiler and the third brake light from a Mercedes A-Class. First, open the trunk. Use a wrench to remove the bolts located at the top. Next, remove the plastic cover over the brake light and disconnect the electrical connector using a sharp pin or a lever. After disconnecting all connectors, detach the rear spoiler from the outside by closing the trunk. Now you can work on removing the third brake light by releasing the tabs with a flat screwdriver.

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spoiler on a Mercedes A-Class?
How to Replace the Spoiler on a Mercedes A-Class?
Mercedes Classe A (2018-2026 / W177) .. To replace the spoiler on a Mercedes A-Class, open the trunk and lower the latches located at the bottom of the inner cover of the trunk. This.. …
How to Remove the Rear Bumper of a Mercedes A-Class
How to Remove the Rear Bumper of a Mercedes A-Class
Mercedes Classe A (2018-2026 / W177) .. you begin, lift the front of your Mercedes A-Class. Start by disconnecting and removing the clips securing the rear bumper. Next, unscrew and remove.. …
How to Remove the Rear Bumper of a Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. you begin, open the trunk of your Mercedes A-Class. Start by removing the covers from the bolts that secure the bumper. Once done, proceed to unscrew.. …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos