Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Battery in Mercedes G-Class

Model: Mercedes Classe G W4631st - Years: 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Battery

See other generations:
Video tutorial

The Mercedes Benz G-Class has a unique feature: the car battery is located inside the cabin, not under the hood as is typical. The first thing to do to access it is to remove the panel below the air vents, which contains the two cup holders, by unscrewing the two screws at the base.

Once the panel is removed, you will see the battery in front of you: unscrew the two screws related to the mounting bracket. After that, first unscrew the negative terminal and then the positive terminal, disconnecting them from the battery.

Remove the battery from the top and install the new one.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery on a Mercedes G-Class?
How to Replace the Remote Battery on a Mercedes G-Class?
Mercedes Classe G (2018-2024 / W4632nd) .. the battery in the remote for a Mercedes G-Class, a very simple and quick operation. You will need a replacement battery of type CR2032. First,.. …
Position and functions of the auxiliary battery of the Mercedes G-Class
Position and functions of the auxiliary battery of the Mercedes G-Class
Mercedes Classe G (1989-2018 / W4631st) .. of the auxiliary battery on a Mercedes G-Class. It is a small 12-volt battery that accompanies the main battery. Its main function is to support.. …
Where to Find the Cabin Fuse Box in the Mercedes G-Class W463
Where to Find the Cabin Fuse Box in the Mercedes G-Class W463
Mercedes Classe G (2018-2024 / W4632nd) .. where the fuse box is located in your Mercedes G-Class W463, the steps described in the following guide are all you need. First, open the front passenger.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Warning Light on the Jeep Compass?

To reset the tyre pressure warning light on the Jeep Compass, inflate all tyres to the correct pressure value, which is indicated on the sticker affixed to the driver’s door pillar. Once all tyres are at this pressure, switch on the ignition and press and hold the corresponding button located to the left of the steering wheel. This will turn off the warning light, but to prevent it from reactivating, you must reset the system using an OBD scanner connected to the designated port.

Watch the video!


by ScegliAuto

More videos