Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Driver's Seat Backrest of a Mercedes C-Class

Model: Mercedes Classe C W205 - Years 2014-2021
Part: Seat

Before starting, sit in the driver's seat of your Mercedes C-Class. Next, activate the instrument cluster by simply turning the key in the ignition switch. The seat adjustment buttons are located on the lower left side of the seat. Proceed by pressing the backrest button until it reaches your desired position. Once you have adjusted the backrest, you can save the setting by pressing the appropriate button located near the adjustment button, and you will be done.

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seat on a Mercedes C-Class
How to Remove the Rear Seat on a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. Removing the rear seats from your Mercedes C-Class? Let's see how to do it: enter the back of the vehicle and lift the rear seat cushion (pressing.. …
How to Remove the Rear Bench Seat of the Mercedes C-Class
How to Remove the Rear Bench Seat of the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. the rear seat or bench seat of the Mercedes C-Class for cleaning or replacing the seats, following the instructions below. First, open the rear doors.. …
How do you remove the rear seats in the Mercedes C-Class w204?
How do you remove the rear seats in the Mercedes C-Class w204?
Mercedes Classe C (2007-2013 / W204) .. to specify, is carried out in a Mercedes C-Class w204, but it is very similar to the Mercedes C-Class w203, so the video available here can be used.. …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos