Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cup Holder on the Mercedes E-Class

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Checks and maintenance

Want to remove the cup holder on the Mercedes E-Class? Here’s how to remove the piece that is stuck (if damaged) above the center tunnel. Open the glove compartment located above the center tunnel and locate the plastics of the cup holder. Release the securing plastics on the side of the cup holder using a screwdriver. Once this is done, pull the cup holder out from the center tunnel (disconnect any power cables). Install the new piece in the center tunnel, securing the fastening plastics.

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seat Bench of a Mercedes E-Class
How to Remove the Rear Seat Bench of a Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. start, open the rear doors of your Mercedes E-Class. Begin by prying off and removing the rear cup holder cover, then detach it by unscrewing the mounting.. …
Disassembly and replacement of the window switch of the Mercedes E-Class
Disassembly and replacement of the window switch of the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. and replace the window switch of the Mercedes E-Class. First, we open the door and start unscrewing the fastening screws of the lock; then we remove.. …
Removing the Handbrake Lever from the Mercedes E-Class
Removing the Handbrake Lever from the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. remove the handbrake lever from the Mercedes E-Class by following these simple steps. First, get into the driver's seat and start by removing the plastic.. …

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos