Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Center Console and Armrest Compartment

Model: Mercedes Classe E W210 - Years 1995-2002
Part: Glove compartment

According to the creator of this video, removing the center console of the Mercedes E-Class is really a piece of cake, doable with just your fingers while being careful of the few electrical connectors. Only to remove the front part under the multimedia system is a screwdriver necessary, along with a flat, thin tool to use as a lever to extract the plastic on the back of the tunnel. With a few simple steps, you can completely remove the cover of the center tunnel of your vehicle. So, just a few simple operations, within everyone's reach.

Updated on 2 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Removing the Dashboard of the Mercedes E-Class
Removing the Dashboard of the Mercedes E-Class
Mercedes Classe E (1976-1985 / W123) This guide will show you step-by-step instructions on how to remove and replace the entire dashboard of the Mercedes E-Class. First, get inside the v…
How to Remove the Center Console of a Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) In this video, see how to disassemble and remove the trim panel of the center console of a Mercedes E-Class. Position the gear shift knob vertically.…
Disassembly of the central console of the Mercedes E-Class
Disassembly of the central console of the Mercedes E-Class
Mercedes Classe E (2016-2023 / W213) Following these brief and simple steps, we will see the process of disassembling the central console of the Mercedes E-Class. First, we get on board …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos