Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio from a Mercedes E-Class

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Car stereo

See other generations:
Video tutorial

Replace the radio in the Mercedes E-Class if you want to change it or if it is damaged. Remove the trim above the plastic center tunnel (where the knob is), and detach it from the center tunnel.

Once you have removed the tunnel cover, unscrew the securing screws located under the radio using a screwdriver (remove the drawer under the radio). Pull out the stereo by hand and disconnect the wires (power and antenna).

To reassemble, reverse the disassembly steps. Install the new radio, screw in the screws, and cover the center tunnel with the trim.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

How to Remove the Radio in a Mercedes E-Class?
How to Remove the Radio in a Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. will see how to remove the radio in a Mercedes E-Class, a very simple and quick operation. First, ensure the key is not inserted. Then, locate the retaining.. …
How to Reset the Mercedes E-Class Radio
How to Reset the Mercedes E-Class Radio
Mercedes Classe E (2002-2009 / W211) .. To reset the radio in the Mercedes E-Class, open the trunk of the vehicle to access the interior of the cargo area. You will need to remove.. …
How to Reset the Radio on a Mercedes-Benz E-Class?
How to Reset the Radio on a Mercedes-Benz E-Class?
Mercedes Classe E (2009-2016 / W212) .. To reset the radio on a Mercedes-Benz E-Class, first turn on the instrument cluster by inserting the ignition key into the corresponding slot... …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos