Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery in a Mercedes E-Class

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Antenna

See other generations:
Video tutorial

How do you maintain your Mercedes? This guide explains how to replace the battery in the E-Class. Open the car door and pull up the engine hood release lever located at the bottom left of the dashboard, then lift the hood, disengaging the lock lever with your fingers, and secure it. Once the engine compartment is open, you will find the battery to be replaced at the top left; remove the securing pins from the battery terminals, then take it out of the engine compartment and replace it with a new one (same voltage).

Close the hood after installation.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Mercedes E-Class
How to Replace the Battery in a Mercedes E-Class
Mercedes Classe E (2016-2023 / W213) .. perform the battery replacement in a Mercedes E-Class, first, open the hood. The battery is located in the upper left area. After removing the plastic.. …
Replacing the Battery in a Mercedes E-Class
Replacing the Battery in a Mercedes E-Class
Mercedes Classe E (1995-2002 / W210) .. Replace the damaged battery in a Mercedes E-Class. Open the trunk of the car (in the Mercedes E, the battery is located in the rear) and uncover.. …
Where is the auxiliary battery located in the Mercedes E-Class?
Where is the auxiliary battery located in the Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. auxiliary battery is located in the Mercedes E-Class and how to proceed if you need to remove it, a very simple operation. As shown, the battery is.. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos