Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio in a Mercedes E-Class?

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Car stereo

See other generations:
Video tutorial

In this tutorial, you will see how to remove the radio in a Mercedes E-Class, a very simple and quick operation. First, ensure the key is not inserted.

Then, locate the retaining clips inside the air vents, unlock them, and detach the entire panel from the dashboard. Next, disconnect the various connectors, remove the radio mounting screws using a Torx T20 wrench, and by pulling it outward, extract the module from the housing.

To install a replacement, simply follow the reverse procedure.


Updated on 17 August 2026 by ScegliAuto


Related tutorials

Removing the Radio from a Mercedes E-Class
Removing the Radio from a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. Replace the radio in the Mercedes E-Class if you want to change it or if it is damaged. Remove the trim above the plastic center tunnel (where.. …
How to Remove the Radio from a Mercedes E-Class
How to Remove the Radio from a Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. To remove the radio from a Mercedes E-Class, open the glove compartment located on the passenger side. At the top of the compartment, you will.. …
How do you reset the radio of the Mercedes E-Class?
How do you reset the radio of the Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) .. It will be possible to reset the Mercedes E-Class car radio by removing and reinserting the corresponding fuse from its slot: to do this, you will.. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos