Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Mercedes E-Class Radio

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Warning light – error code

To reset the radio in the Mercedes E-Class, open the trunk of the vehicle to access the interior of the cargo area. You will need to remove the trim located on the right side of the trunk to access the radio control module. Disconnect this module from its connector and leave it disconnected for a few minutes. This will process the radio reset, and when you reconnect the module, you will notice that all settings have been restored to their default values.

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from the Mercedes E-Class?
How to Remove the Radio from the Mercedes E-Class?
Mercedes Classe E (1995-2002 / W210) To remove the radio from the Mercedes E-Class, insert the appropriate release keys into the holes located at the two lower corners of the unit. Once …
How to Remove the Radio in a Mercedes E-Class?
How to Remove the Radio in a Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) In this tutorial, you will see how to remove the radio in a Mercedes E-Class, a very simple and quick operation. First, ensure the key is not inserte…
How do you reset the radio of the Mercedes E-Class?
How do you reset the radio of the Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) It will be possible to reset the Mercedes E-Class car radio by removing and reinserting the corresponding fuse from its slot: to do this, you will ne…

    Frequently Asked Questions

    • Classe E 1995-2002 - How to reset the air conditioning in Mercedes E-Class? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos