Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Logo and Distance Sensor on Mercedes B-Class

Model: Mercedes Classe B W246, MK 2 - Years 2011-2019

In today's video, you will see the steps to remove and replace the front logo and distance sensor on a Mercedes B-Class, but also on the A-Class W177, CLA, and GLA. To remove the logo, gently pry on the sides of the logo with one or more plastic levers; once removed, disconnect the electrical connector of the sensor, as shown in the video. At this point, remove the sensor from the logo of your car by prying on the clips; simply replace it with the new one, applying the reverse procedure of disassembly!

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Collision Prevention Assist in the Mercedes-Benz B-Class
How to Remove the Collision Prevention Assist in the Mercedes-Benz B-Class
Mercedes Classe B (2011-2019 / W246, MK 2) .. Prevention Assist system in the Mercedes-Benz B-Class, specifically how to extract the sensor located at the front of the car. The device is positioned.. …
How to Remove the Front Badge from a Mercedes B-Class
How to Remove the Front Badge from a Mercedes B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) .. starting, exit the cabin of your Mercedes B-Class and head to the front of the vehicle. Begin by disengaging and extracting the badge along with.. …
How to disassemble the steering angle sensor on the Mercedes B-Class W245 version
How to disassemble the steering angle sensor on the Mercedes B-Class W245 version
Mercedes Classe B (2005-2011 / W245, MK 1) .. the steering angle sensor on the Mercedes Class B version W245; in fact, the car indicated a fault with the ESP system and then the generic error.. …

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos