Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Badge from a Mercedes B-Class

Model: Mercedes Classe B W245, MK 1 - Years 2005-2011
Part: Manufacturer emblem

Before starting, exit the cabin of your Mercedes B-Class and head to the front of the vehicle. Begin by disengaging and extracting the badge along with the associated sensor from the front grille, using a thin but sturdy tool to lever it out. Next, disconnect the electrical connector. Once this is done, release the clips securing the sensor to the front badge. After completing this step, you can remove the front badge from your Mercedes B-Class, successfully finishing the removal.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Stuck Bonnet of the Mercedes B-Class
How to Open the Stuck Bonnet of the Mercedes B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) .. to open the stuck bonnet of the Mercedes B-Class in case of emergency. First, pull the bonnet release lever; then, move to the front and remove.. …
How to Remove the On-Board Computer in the Mercedes B-Class?
How to Remove the On-Board Computer in the Mercedes B-Class?
Mercedes Classe B (2011-2019 / W246, MK 2) .. the on-board computer from the Mercedes B-Class is a straightforward task. First, locate the holes at the bottom of the air vent grilles. Insert.. …
How to replace the front fog light bulb of the Mercedes B-Class
How to replace the front fog light bulb of the Mercedes B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) .. replace the front fog light bulb of the Mercedes Classe B. First of all, let's move to the front part of the car and start by removing the plastic cover.. …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos