Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the Tire Pressure Light on Mercedes A-Class

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Tire pressure warning light

In this video, you can see how to reset the tire pressure light on a Mercedes A-Class. First, take your vehicle to a tire shop to check the condition of the tires and their pressure. Once this step is completed, you can perform the reset: open the driver's side door, get inside the vehicle, turn on the ignition, navigate through the MENU using the arrow buttons on the steering wheel until you reach the tire pressure settings (TIRE PRESSURE), check and confirm by pressing OK. At this point, you have successfully reset the tire light.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on a 2008 Mercedes A-Class
How to reset the TPMS light on a 2008 Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. pressure warning light comes on in 2008 Mercedes Class A vehicles when it is necessary to check the tire pressure. This operation is very important because.. …
How to reset the TPMS light on the Mercedes A-Class.
How to reset the TPMS light on the Mercedes A-Class.
Mercedes Classe A (2004-2012 / W169) .. the tire pressure warning light on a Mercedes Classe A and Mercedes Classe B. To reset the warning light, we need to turn on the instrument panel and.. …
How to Reset the TPMS Light on the Mercedes A-Class
How to Reset the TPMS Light on the Mercedes A-Class
Mercedes Classe A (2018-2026 / W177) .. Resetting the TPMS light on the Mercedes A-Class is a simple task you can do yourself. To reset the light, turn on the vehicle's ignition and then.. …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos