Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tail Light Bulb on a Mercedes C-Class

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Tail light bulb

Before you can start, open the rear hatch of your Mercedes C-Class. Begin by unclipping and removing the inner side cover of the trunk. Next, unclip the clips that secure the bulb holder to the tail light. By doing this, you will free the bulb holder. At this point, you will have access to the burnt-out bulb, which you can unclip and remove, successfully completing the disassembly. To install the new bulb, simply follow these instructions in reverse, and you will have completed the replacement.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Mercedes C-Class
How to Replace the Headlight Bulb on a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. you begin, open the hood of your Mercedes C-Class. Start by unscrewing and removing the rear cover of the bulb. Next, disconnect the electrical connector,.. …
Replacing the Rear Headlight Bulb on the Mercedes C-Class
Replacing the Rear Headlight Bulb on the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. the rear headlight bulbs on the Mercedes C-Class. First, open the trunk and start removing the two plastic clips located on the side of the headlight;.. …
How to Replace the Tail Light Bulbs on a Mercedes C-Class
How to Replace the Tail Light Bulbs on a Mercedes C-Class
Mercedes Classe C (1993-2000 / W202) .. the tail light and its bulbs on a Mercedes C-Class. First, open the trunk lid and start by disengaging the two plastic tabs on the tail light housing... …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos