Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear taillight of the Mercedes C-Class

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Tail light

Below we will see information on how to disassemble and replace the rear taillight and its bulbs of the Mercedes C-Class. First, we open the rear trunk door and start removing the side trim; then we unscrew the screws of the headlight and disconnect the electrical connector of the bulbs, thus removing the bulb holder, as shown in the video. At this point, we remove the headlight from the outside, replacing it if necessary with a new one; we reassemble the rear headlight and make the connection, checking the operation of all the stop lights!

Posted on 5 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear headlight bulbs of the Mercedes C-Class
Replacement of the rear headlight bulbs of the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. bulbs of the rear headlight of the Mercedes C-Class. First, open the rear hatch of the trunk and start removing the side cover to access the inside.. …
How to replace the rear headlight bulb of the Mercedes C-Class
How to replace the rear headlight bulb of the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. bulbs of the rear headlight of the Mercedes C-Class. First of all, open the rear hatch of the trunk and start removing the plastic side clips; then.. …
How to Replace the Rear Turn Signal Bulb on the Mercedes C-Class W203
How to Replace the Rear Turn Signal Bulb on the Mercedes C-Class W203
Mercedes Classe C (2000-2007 / W203) .. the rear turn signal bulb on the Mercedes C-Class W203: first, open the trunk and remove the carpet covering near the rear light. You will find a.. …

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos