Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Maintenance Light on Mercedes B-Class W246

Model: Mercedes Classe B MK 2, W246 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Warning light – error code

See other generations:
Video tutorial

To reset the service light on the Mercedes B-Class W246, do the following: Insert the key into position 1. After doing this, the dashboard will light up and the car will display the total mileage. At this point, press the call button and the OK button for three seconds.

After three seconds, the car will display the submenu; scroll down using the down arrow button to 'Maintenance' and confirm with the OK button. Next, scroll to the last entry indicating 'Full Service', select it with OK, and the car will ask if the oil temperature is correct; confirm with OK and the car will reset the service light.

To check if the reset was successful, turn off and then turn on the ignition.


Updated on 20 May 2026 by ScegliAuto


Related tutorials

Mercedes Classe B (2011-2019 / MK 2, W246) Let’s see how to reset the service light on a Mercedes Class B W246: turn on the instrument cluster to illuminate all the lights and display the tota…
Mercedes Classe B (2011-2019 / MK 2, W246) The OBD port on your Mercedes Class B W246 (2012 model) is hidden inside the cabin. This guide will explain how to locate it in a few simple steps. F…
Mercedes Classe B (2011-2019 / MK 2, W246) In this video, you will see the procedure necessary to reset the engine warning light, mainly due to a mechanical fault in the vehicle, on the Merced…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos